Chair: Jae Kap Jung, Korea Research Institute of Standards and Science

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P01 A
Reference setup for the calibration of power transformer loss measurement systems
Ernest Houtzager, VSL Dutch Metrology Institute

P02 B
Calibration systems for analogue non-conventional voltage and current transducers
Ernest Houtzager, VSL Dutch Metrology Institute

P03 A
An Improved Partial Discharge Location Method in Substations: Error Reduction based on MonteCarlo Simulation
Yue Hu, Shanghai Jiao Tong University

P04
B Hydro-Generator Sudden Short-Circuit Testing Using Rogowski Coils
Branislav Djokic, Hydro-Quebec

P05
A Modified Step-Up Technique for the DC High Voltage Traceability
Kyu-Tae Kim, Korea Research Institute of Standards and Science

P06
B Use of a Nanocrystalline Core for a Precise Non-invasive AC Current Measurement
Radek Prochazka, Czech Metrology Institute

P07
A International Comparison of Instrument Current Transformers up to 10 kA at 50 Hz Frequency
Renata Styblíková, CMI

P08
B Comparison of the Phase Angle Errors between RVD and IVD
Xianlin Pan, NIM

Chair: Franz Ahlers, PTB

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P09 A
Precision Measurements of Quantum Hall Resistance Plateau in Doping-Controlled Graphene Device
Dong-Hun Chae, Korea Research Institute of Standards and Science

P10 B
Operation of a Cryogenic Current Comparator in Presence of Mechanical Vibrations
Martin Götz, Physikalisch-Technische Bundesanstalt (PTB)

P11 A
Performance of the Binary Compensation Unit for Cryogenic Current Comparators
Martin Götz, Physikalisch-Technische Bundesanstalt (PTB)

P12 B
Characterization of HMDS treated CVD Graphene
KÜRTEN IHLENFELD, Waldemar Guilherme, INMETRO

P13
A Development of a PJVS Based Primary AC Power Standard
Waldemar Guilherme Kürten Ihlenfeld, INMETRO

P14 B
Development of the single quantum Hall devices for the resistance standard in NIM
Xueshen Wang, National Institute of Metrology

P15
A Evaluation of the Alignment Errors in Joule Balance Caused by Horizontal Forces and Torques
Tao Zeng, Harbin Institute of Technology

Chair: Rolf Judaschke, PTB

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P16 B
New Effective Coaxial Twin-Load Microcalorimeter system
Murat Celep, National Institute for Standards

P17 A
International Comparison of WR15 (50 to 75 GHz) Power Measurements among NIST, NIM, PTB and NMC
Xiaohai Cui, National Institute of Metrology, China

P18 B
Measurement Comparison up to 65 GHz in Coaxial 1.85 mm Line
Christopher Eiø, National Physical Laboratory

P19
A Considerations for Using Waveguide Extenders
Johannes Hoffmann, METAS

P20 B
Effects of Connectors and Improper Mounting of Air Lines in TRL Calibration
Johannes Hoffmann, METAS

P21 A VRC
Measurement for 3.5 mm Coaxial System Using Network Analyzer Fitted with Type K Connector
Aaron Y.K. Yan, Standards and Calibration Laboratory

P22 B
Verification concepts in S-parameter measurements
Markus Zeier, METAS

Chair: Javier Diaz De Aguilar, Centro Español de Metrología (CEM)

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P23 A
A Low Frequency Josephson Impedance Bridge
Gunnar Eklund, SP Technical Research Institute of Sweden

P24 B
Bilateral International Inductance Comparison Using Traveling Standards in Thermoregulated Enclosures
Torsten Funck, Physikalisch-Technische Bundesanstalt

P25 A
SIM Key Comparison of 10 mH Inductance Standards
Jose Angel Moreno Hernandez, Centro Nacional de Metrologia

P26 B
Determination and Use of Temperature Coefficients of Inductance Standards
Jose Angel Moreno Hernandez, Centro Nacional de Metrologia

P27 A
Development of Calculable Resistors at CENAM
Alepth Pacheco Estrada, Centro Nacional de Metrología

Chair: Randolph Elmquist, National Inst. Of Standards And Technology

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P28 B
Comparison between GaAs and graphene QHR standards for resistance realisation at SP
Tobias Bergsten, SP Technical Research Institute of Sweden

P29 A
Carrier Concentration Adjustment in Epitaxial Graphene QHR Devices
Nick Fletcher, BIPM

P30 B
Fabrication of graphene quantum Hall resistance standard in a cryogen-free table-top system
Hans He, Chalmers University of Technology

P31 A
Improvement of Chemical Vapor Deposition Graphene for Quamtum Hall Resistance Standard device
Xueshen Wang, National Institute of Metrology

P32 B
Dissipation Factor and Frequency Dependence of Graphene Quantum
Cay-Christian Kalmbach, Physikalisch-Technische Bundesanstalt

Chair: Gordon Shaw, U.S. National Institute of Standards and Technology (NIST)

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P33 A
Six-axis Heterodyne Interferometer System for Joule Balance
Yang Bai, Harbin Institute of Technology

P34 B
Fundamental parameter determination to improve spectroscopical methods
Michael Kolbe, Physikalisch-Technische Bundesanstalt

P35
A Time-domain Phase Noise Measurement in the Optical Frequency Region
Wataru Kokuyama, NMIJ/AIST

Chair: Haiming Shao, National Institute of Metrology(NIM), P.R.China

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P36 B
Error Estimation of Magnetic Flux Measurement of the Permanent Magnet in Open Magnetic Circuit
Yan Yang, National Institute of Metrology, China

P37 A
Determination of the Verdet Constant of Low Birefringence Single-Mode Optical Fiber
Daniela Istrate, LNE

P38 B
Geomagnetic Measurement and Analysis of Cheongyang Observatory
Po Gyu Park, Korea Research Institute Of Standards And Science(KRISS)

Chair: Ian Robinson, National Physical Laboratory

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P39 A
Nanoradian Angle Measurements Using Differential Fabry-Perot Interferometer
Mehmet Çelik, TUBITAK UME

P40 B
Improved NMR magnetometer for weak fields
Ramon Martin, IPT-SP

P41 A
Precise measurement of inhomogeneity of two dimensional system by six point method
Krzysztof Szymański, University of Białystok

P42 B
Nonlinearity Testing of Capacitance Bridges Using Programmable Capacitors
Yicheng Wang, National Institute of Standards and Technology

Chair: Waldemar Guilherme Kürten Ihlenfeld, INMETRO

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P43 A
An Evaluation Method for Wideband Voltage Dividers Using Two Phase-locked Signal Generators
Hiroyuki Fujiki, National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology (NMIJ, AIST)

P44 B
Design of a Thermal Converter with Frequency Output
Gean Geronymo, Inmetro

P45 A
About the Use of Ellipse Fitting Algorithm in Sampling Measurements of Complex Ratio of AC Voltages
Marian Kampik, Silesian University of Technology

P46 B
Trilateral Comparison of a Planar Thin-Film Thermal AC Voltage Standard up to 1 MHz
Marian Kampik, Silesian University of Technology

Chair: Anders Bergman, SP Technical Research Institute of Sweden

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P01 A
Making Low Level AC Voltage Measurements with DVM
Gleb Gubler, D.I.Mendeleyev Institute for Metrology (VNIIM)

P02 B
A Novel TDM-Based High Precision Wattmeter
Ljubiša Jovanović, Institute Mihajlo Pupin

P03 A
An Absolute Method for Determining the Dissipation Factor of Capacitors at Voltages up to 1 kV
Jae Kap Jung, Korea Research Institute of Standards and Science

P04 B
Error Correction: a Proposal for a Standard
Thomas Nelson, National Research Council of Canada

P05 A
Experiments for Calibrate Differential Phase Measurement System
You Li, Beijing Orient Institute of Measurement and Test

P06 B
An AC Power Amplifier for Testing Instrument Transformer Test Equipment
Enrico Mohns, PTB

P07 A
Evaluation of Digital Energy Meter Error by Monte Carlo Method
Zhengsen Jia, National Institute of Metrology

Chair: Blaise Jeanneret, METAS

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P08 B
Packaging of fiber-coupled module for Josephson Junction Array voltage standards
Eivind Bardalen, University College of Southeast Norway

P09 A
Series arrays of NbSi barrier Josephson junctions for AC voltage standards
Johannes Kohlmann, PTB

P10 B
Tests on waveform synthesis in a new cryocooler setup
Andrea Sosso, INRIM

P11 A
Stepwise waveform generation using Josephson voltage standards for joule balance
Zhengkun Li, National Institute of Metrology

Chair: Djamel Allal, LNE

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P12 B
Material Measurements Using the Vector Network Analyzer
Luciano Brunetti, Istituto Nazionale di Ricerca Metrologica (INRIM)

P13 A
Free-Space Measurement of the Complex Permittivity of Liquid Materials at Millimeter-wave Region
Tae-Weon Kang, Korea Research Institute of Standards and Science

P14 B
Permittivity measurement using a long fixture to eliminate reflection effect at fixture ends
Yuto Kato, National Institute of Advanced Industrial Science and Technology

P15 A
Dynamic Measurements of Moisture Content using Microwave Signal and its Verification
Seitaro Kon, AIST,NMIJ

P16 B
High Precision Slotted Cavity Measurement of a Novel Ceramic State Polymer Electrolyte
Brian O'Keefe, Tufts University

P17 A
Traceable type N calibration kit: DC to 1 GHz
François Ziadé, LNE

Chair: Daniela Istrate, LNE

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P18 B
Research on Current Calibration System with High Stability
Song Jiayun, Beijing Orient Institute of Measurement and Test

P19 A
Cable Noise Investigations for High-Accuracy Measurements of Small Direct Currents
Christian Krause, Physikalisch-Technische Bundesanstalt

P20 B
Improved Calibration of Instruments for Small Direct Currents
Hansjoerg Scherer, Physikalisch-Technische Bundesanstalt (PTB)

P21 A
Fiber-Optic Current Sensor Utilized for DC High Current Calibration
Wei Zhao, National Institute of Metrology(NIM), P.R.China

P22 B
Design of the Current Comparator for Measuring the Current Shunts at Common Ground
Xianlin Pan, NIM

Chair: Ali Eichenberger, METAS

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P23 A
The new interferometer of the BIPM watt balance
Franck Bielsa, BIPM

P24 B
Concentricity Alignment between Electromagnet Yoke and Suspended Coil in NIM-2
Zhengkun Li, National Institute of Metrology

P25 A
Progress of an Atomic Gravimeter at KRISS
TaegYong Kwon, Korea Research Institute of Standards and Science

P26 B
Static Phase Improvements in the LNE watt balance
François Piquemal, LNE

P27 A
A Magnetic Damping Device for Watt and Joule Balances
Jinxin Xu, Department of Electrical Engineering, Tsinghua University

P28 B
An Analytical Model for Designing Permanent Magnet Systems in Watt and Joule Balances
Jinxin Xu, Department of Electrical Engineering, Tsinghua University

P29 A
Homogeneity Characterization of Lattice Spacing of 28Si Single Crystals
Atsushi Waseda, National Institute of Advanced Industrial Science and Technology

Chair: Yicheng Wang, NIST

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P30 B
Comparison Among Three Impedance Bridges for Capacitance Measurements at the nF Range
Waldemar Guilherme Kürten Ihlenfeld, INMETRO

P31 A
A Comparison of the Josephson Impedance Bridges of PTB and SP
Gunnar Eklund, SP Technical Research Institute of Sweden

P32 B
Comparison of the Frequency Dependence of Capacitance Ratios between LNE and PTB
Thomas Hagen, PTB

P33 A
Improvement on Alignment of Fabry-Perot Interferometer in Calculable Capacitor
Lu Huang, National Institute of Metrology

P34 B
Method of Displacement Determination in Calculable Capacitor at NIM
Lu Huang, National Institute of Metrology

P35 A
Four Terminal Pair Digital Sampling Impedance Bridge
Stanislav Mašláň, Czech Metrology Institute

P36 B
Digital Sampling Setup for Measurement of Complex Voltage Ratio
Stanislav Mašláň, Czech Metrology Institute

P37 A
A Digital Impedance Bridge with Auto-balancing Source Ratio
Yan Yang, National Institute of Metrology, China

Chair: Dean Jarrett, National Institute of Standards and Technology

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P38 B
Study of Contact Resistance with Physical Simulating using Nano-fabrication
Yasuhiro Fukuyama, National Metrology Institute of Japan (NMIJ), AIST

P39 A
The Enhanced Performance of the DCC Current Comparator using AccuBridge™ Technology
Shiping Huang, Measurements International

P40 B
On Aspects of Calibration of DC Resistance Ratio Bridges
Jan Kučera, Czech Metrology Institute

P41
A Testing the New Generation of Low-Frequency Current Comparators
Alexandre Satrapinski, VTT-MIKES Metrology

Chair: Bjørnar Karlsen, Justervesenet

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P42 B
Automated Setup for Calibration of Calibrators at Alternating Voltage and Alternating Current
Torsten Funck, Physikalisch-Technische Bundesanstalt

P43 A
Quasi coherent overlapping procedure to improve harmonics suppression
Rado Lapuh, Metrology Institute of the Republic of Slovenia

P44 B
Keysight 3458A noise performance
Rado Lapuh, Metrology Institute of the Republic of Slovenia

P45 A
Zener DC Voltage Standard Pressure Coefficient Measurement
Roger Melendez, ICE: Instituto Costarricense de Electricidad

P46 B
QWTB – Software Toolbox for Sampling Measurements
Martin Šíra, Czech Metrology Institute

P47 A
Calculable Thermal AC Voltage Standards for 10 kHz - 1 MHz Frequency Range
Marian Kampik, Silesian University of Technology

Chair: Gert Rietveld, VSL

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P01 A
Requirements for an Advanced PMU Calibrator
Christian Mester, Federal Institute of Metrology METAS

P02 B
Development of a System for the Calibration of Digital Bridges for Non-Conventional Transformers
Branislav Djokic, National Research Council of Canada

P03 A
Behaviour of different PMU algorithms under static and dynamic conditions
Miha Kokalj, SIQ

P04 B
Algorithm for measuring amplitude and frequency deviations intended for PMU
René David Carranza Lopez Padilla, Centro Nacional de Metrologia

P05 A
Modelling of PMU Uncertainty by Means of Monte Carlo Method
Martin Šíra, Czech Metrology Institute

P06 B
Synchrophasor-based Transmission Line Impedance Measurement
Deborah Ritzmann, National Physical Laboratory

P07 A
Precision Measurement System for the Calibration of Phasor Measurement Units
Dimitrios Georgakopoulos, National Measurement Institute Australia

P08 B
Advanced Applications of AMR Data to Generate Functions for Enhancing SMART GRID Operation
Sioe Mak, ESTA International, LLC, USA

Chair: Luis Palafox-Gámir, PTB

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P09 A
Portable Josephson Voltage Reference Standard
Ralf Behr, D.I. Mendeleyev Institute for Metrology (VNIIM)

P10 B
Differential Sampling Measurements of Low-Frequency Sinusoidal Waveforms Using AC-PJVS
Shih-Fang Chen, Industrial Technology Research Institute (ITRI)

P11 A
Voltage Lead Errors in an AC Josephson Voltage Standard: Explanation in Terms of Standing Waves
Helko E. Van Den Brom, VSL

P12 B
Research on Differential Sampling Method with Josephson Voltage Standard
Honghui LI, National Institute of Metrology

Chair: Christopher Eiø, NPL

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P13 A
S parameters measurement of antennas under thermal stress
Djamel Allal, LNE

P14 B
Calibration of Sample-Time Error in a Sampling Oscilloscope and Uncertainty Analysis
Chihtyun Cho, KRISS

P15
A Study on Calibration of Terahertz Attenuators
Hitoshi Iida, NMIJ/AIST

P16
B Uncertainty Improvement of Monopole Antenna Calibration Using ECSM
Tae-Weon Kang, KRISS

P17
A Measurement of microwave magnetic field in free space using the Rabi frequency
Moto Kinoshita, National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology

Chair: Torsten Funck, Physikalisch-Technische Bundesanstalt

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P18 B
Extending AC-DC Current Transfer to 100 A, 100 kHz in UME
Mehedin Arifovic, TUBITAK Ulusal Metroloji Enstitusu

P19 A
Development of Primary Standard for AC-DC Current Transfer Difference
Věra Nováková Zachovalová, Czech Metrology Institute

P20 B
The Establishment of mA CT Calibration System at KTL and Comparison with NRC
Kwangjae Song, Korea Testing Laboratory

P21 A
AC-DC Current Transfer Difference Estimation of Thin-Film Multijunction TCs up to 1 MHz"
Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica - I.N.Ri.M.

P22 B
A High Current Nanosecond Pulse Generator for Calibrating Current Shunts
Haiming Shao, National Institute of Metrology

P23 A
Analysis on Double-layer Squirrel-cage Shunt for Large Pulse Current with High Frequency
Shuqiang Wang, Beijing Orient Institute of Measurement & Test

Chair: Stephan Schlamminger, National Institute of Standards and Technology

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P24 B
Feasibility Study of Electrical Measurements of Oscillating – Magnet Watt Balance
Tezgül Coşkun Öztürk, TÜBİTAK UME

P25 A
Gravity Measurements for the KRISS Watt Balance
In-Mook Choi, Korea Research Institute of Standards and Science

P26 B
Frequency Estimation of a Damped Sinusoidal Signal and Comparison to Theoretical Lower Bound
Isaac Fan, PTB

P27 A
Plane mirror based method for laser beam alignment
Yunfeng Lu, National Institute of Metrology, CHINA

P28 B
Monitoring Gravity for the NIST-4 Watt Balance
Darine Haddad, National Institute of Standards and Technology

P29 A
The feasibility of a watt balance based on twin pressure balances
Christopher Sutton, Callaghan Innovation

P30 B
Preliminary result of accurate gravimetry at NIM Joule Balance site
Zhengkun Li, National Institute of Metrology (P. R. China)

P31 A
A preliminary magnet nonlinear research on the joule balance
Zhengkun Li, National Institute of Metrology

P32 B
Thickness measurements of oxide and carbonaceous layer on a 28Si sphere by using XPS
Lulu Zhang, National Institute of Advanced Industrial Science and Technology

Chair: Olivier Thévenot, Laboratoire National de Métrologie et d'Essai (LNE)

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P33 A
A New CCEM-K4 Comparison of Capacitance at 10 pF
Pierre Gournay, BIPM

P34 B
Measurement of Frequency Dependence of Standard Capacitors in the Frequency range 10 kHz to 1 MHz
Monthol Homklintian, National Institute of Metrology (Thailand)

P35 A
Simple Resistance Standard with Calculable Time Constant
Stanislav Mašláň, Czech Metrology Institute

P36 B
Towards an Impedance Bridge Based on a Single Programmable Josephson Voltage Standard
Félix Raso, Centro Español de Metrología

P37 A
Method of Calibration of Lock In Amplifiers in Linearity
Félix Raso, Centro Español de Metrología

P38 B
Calculation of High Frequency 4-TP Impedance Standards
Lucie Vojáčková, Czech Metrology Institute

P39 A
A Programmable Capacitor for Inductance Measurements
Bryan Waltrip, NIST

Chair: Thomas Legero, Physikalisch-Technische Bundesanstalt

Session A: 16:00 – 17:00
Session B: 17:00 – 18:00

P40 B
Status of the Cs Fountain Clock at the National Research Council of Canada
Scott Beattie, National Research Council of Canada

P41 A
Drift-compensated Low-noise Frequency Synthesis Based on a CryoCSO for the KRISS-F1(Cs)
Myoung-Sun Heo, KRISS

P42 B
Recent Improvements of NICT atomic fountains CsF1 & CsF2
Motohiro Kumagai, National Institute of Information and Communications Technology

P43 A
Operating Atomic Fountain Clock using Robust DBR Laser System
TaegYong Kwon, Korea Research Institute of Standards and Science

P44 B
Pre-stabilization of a Distributed Feedback Diode Laser for Locking to a High-Finesse Cavity
Mikko Merimaa, VTT Technical Research Centre of Finland Ltd

P45 A
A New Scheme of TWSTFT Receiver for Multiple Access Interference Suppression
Yi-Jiun Huang, Telecommunication Laboratories, Chunghwa Telecom Co., Ltd.

P46 B
Development of GNSS-based High Reliable Time Transfer System
Yuan Xu, Beijing Institute of Metrology

Chair: Gleb Gubler, D.I.Mendeleyev Institute for Metrology (VNIIM)

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P01 A
An electrical power reference system up to 1 MHz
Tobias Bergsten, SP Technical Research Institute of Sweden

P02 B
High Accuracy and Traceable Power Quality Instrument Calibration
Aaron Y.K. Yan, Standards and Calibration Laboratory

P03 A
Using Inductive Voltage Divider to Calibrate Linearity of Wideband Digitizer
Xianlin Pan, NIM

P04 B
Self-Calibration of the Current Comparator with Common Ground
Xianlin Pan, NIM

P05 A
Dynamical Waveforms and the Dynamical Source for Electricity Meter Dynamical Experiment
Hongtao Huang, National Institute of Metrology

P06 B
A Three-Phase Calibration and Field Measurement Setup Based on a Custom Digitizer
Tapio Lehtonen, VTT MIKES Metrology

P07 A
Measurement and estimation of arbitrary signal power using a window technique
Rado Lapuh, Metrology Institute of the Republic of Slovenia

P08 B
Asynchronous 3-Phase Power Measurements
Richard Timmons, Guildline Instruments

Chair: Peter Davis, National Physical Laboratory

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P09 A
Resistor Dividers for Power Quality Meters
Leonardo Trigo, UTE

P10 B
Measuring System for Calibrating High Voltage Instrument Transformers at Distorted Waveforms
Gonzalo Aristoy, UTE

P11 A
Dynamic algorithms for PMUs – methods for improving the signal processing effectiveness
Umberto Pogliano, INRIM

P12 B
A Two-Channel Digital Sampling System for Estimating Harmonic Parameters at Low Frequencies
Carlos Espinosa, CENAMEP AIP

Chair: Uwe Siegner, PTB

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P13 A
Improvements in the Inmetro Zener Calibration Uncertainty Budgets Using CJVS and PJVS
Gregory Kyriazis, INMETRO

P14 B
Towards a Quantum Sampling System
Ralf Behr, Physikalisch-Technische Bundesanstalt

P15 A
Proposal for a New Quantum Voltage Standard based in Optical Frequency measurements
Félix Raso, Centro Español de Metrología

P17 A
Voltage Linearity Evaluation for a High-Speed Digitizer adopted to a Quantum Sampling Voltmeter
Mun-Seog Kim, Korea Research Institute of Standards and Science

Chair: Markus Zeier, METAS

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P18 B
Vector Network Analyzer Comparison up to 110 GHz in 1 mm Coaxial Line
Djamel Allal, Laboratoire National de Métrologie et d'Essais (LNE)

P19 A
Uncertainty Analysis and Evaluation of a WR-28 (26.5 to 40 GHz) Millimeter-Wave Power Standard
Xiaohai Cui, National Institute of Metrology, China

P20 B
Primary Standard and Calibration of Scattering Parameter up to 12 GHz for Type N, 75 ohms
Masahiro Horibe, National Metrology Institute of Japan (NMIJ) National Institute of Advanced Industrial Science and Technology (AIST)

P21 A
Uncertainty Estimation for Gallium Nitride Diode Model based on VNA Measurement at 5.8 GHz
Masahiro Horibe, National Metrology Institute of Japan

P22 B
Bilateral Comparison of RF Power Measurements with 2.4 mm Connectors between SCL and NMC, A*STAR
YuSong Meng, National Metrology Centre, A*STAR

P23 A
Metrological Connector Conversion Technique for Scattering Parameter Calibration
Shintaro Nakamura, Japan Quality Assurance Organization

P24 B
Development of a NIST WR10 Radiometer
Jack Surek, National Institute of Standards and Technology

Chair: Thomas Lipe, NIST

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P25 A
A Comparison of Two Current Transformer Calibration Systems at NRC Canada
Branislav Djokic, National Research Council of Canada

P26 B
AC-DC Disk Resistors Made of Surface-Mount Components
Torsten Funck, Physikalisch-Technische Bundesanstalt

P27 A
AC-DC Current Transfer Standards Suitable for Use Below 1 mA and up to 1 MHz
Torsten Funck, Physikalisch-Technische Bundesanstalt

P28 B
A 10-A Wideband Transconductance Amplifier
Zhengkun Li, National Institute of Metrology, Beijing 100029, China

Chair: Ernest Houtzager, VSL Dutch Metrology Institute

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P29 A
Fabrication of High Value Standard Resistors for ICE-LMVE
Blanca Castro, Instituto Costarricense de Electricidad

P30 B
Evaluation of a Resistive Voltage Divider Based on a Quantized Hall Resistance Voltage Divider
Atsushi Domae, National Metrology Institute of Japan(NMIJ), AIST

P31 A
Double Path System for Resistance Unit Transfer from QHR Primary Std to 100TΩ Std
Krystian Krawczyk, Wroclaw University of Technology

P32 B
Measurement of Conductivity of Materials at PTB
Jürgen Melcher, PTB

P33 A
A Low Thermal EMF Relay-based Scanner for Precision Resistor Load Coefficient Calibration System
Lushuai Qian, China Jiliang University

P34 B
Inmetro's Coaxial Calculable Resistance Project
Gean Geronymo, Inmetro

Chair: Nobu-Hisa Kaneko, NMIJ/AIST

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P37 A
Josephson-Based Characterization of Analog-to-Digital Converters
Blaise Jeanneret, METAS

P38 B
An Improved Sinc Function Compensation Algorithm in AC Programmable Josephson Voltage Standard
Zhengsen Jia, National Institute of Metrology

P39 A
The Accuracy Research of AC Waveform in Differential Sampling Method
Zhengsen Jia, National Institute of Metrology

P40 B
Uncertainty of the signal parameter measurement due to their estimation from sampled data
Rado Lapuh, Metrology Institute of the Republic of Slovenia

P41 A
The AC-AC Transfer Technique with Subsampling
Waldemar Guilherme Kürten Ihlenfeld, INMETRO

Chair: Wilfrid Poirier, LNE

Session A: 14:00 – 15:00
Session B: 15:00 – 16:00

P42 B
Realization of Quantum Hall Effect in Closed Cycle Refrigerators
Jan Kučera, Czech Metrology Institute

P43 A
Application of Robust Control to a Cryogenic Current Comparator
Martin Götz, Physikalisch-Technische Bundesanstalt (PTB)

P44 B
‘Cutoff Frequency’ of Quantum-Dot Pump
Nam Kim, Korea Research Institute of Standards and Science

P45 A
Development of 10kΩ Quantum Hall Array Resistor
Xueshen Wang, National Institute of Metrology